|
Post by cye on Aug 6, 2014 3:22:49 GMT -5
orange has built a new larger twin coil cylinder, this time made from two stainless steel beer kegs (his mk1 model was too small and used only one keg) the top coil is copper and is the boiler/stove coil, and the bottom coil uses the corrugated solar stainless steel flexi pipe. nice work orange.... the above pic shows the mk2 beside the smaller mk1 pic below shows the lower (stainless steel solar) coil Excellent work Orange!
|
|
|
Post by cye on Aug 6, 2014 3:23:50 GMT -5
above pic shows the upper copper coil
|
|